Here are some pics of my latest firing results from my gas kiln.  I take it to Cone 10 and start reduction at 750 degrees C and keep it there til I reach temperature.  I’m getting much better results largely due to my concentrated effort to NOT put runny glazes on the back!! and to avoid using too many test glazes all over pieces (I really don’t know why that would be a struggle!).

I also got lots of great copper reds, but I’ll put them in a separate post.

Get to glazing!

Love,

Marian

firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Tenmoku with Teadust
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Copper Red Glaze with chun spray-missed reduction on one side.
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Red with Chun-dipped.
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Black with Blue Green Rabbit Fur and Iris.
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Drunken Cups with a variety of glazes-one good one is Ranch Butter.
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Teadust on Tenmoku
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Two drunken cups-Ranch butter-one with RIO on edge??
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Black with white dipped on top.
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Janet DeBoos glaze ??
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Tenmoku with Chun
firing results-gas reduction kiln-cone 10-high fire glazes-tenmoku
Laura’s Green on Drunken Vessel